What are the precautions for the use of CNC bus processing machine

by:JPSK     2021-06-08
The CNC bus processing machine is mainly suitable for the high and low voltage switchgear and transformer manufacturing industries. It is used to process various specifications of copper and aluminum bus bars. At the same time, it can be punched, cut, and folded separately, and the production efficiency is good. Then the CNC bus processing What are the precautions for the use of the machine? Let’s take a look at it.   1. When using the CNC bus processing machine, you must select an operator who has been rigorously trained and proficient in use, maintenance, and other techniques. Work.    2. Operators should not wear large clothing or decorative items, and use safety helmets, goggles, safety boots, gloves and other protective equipment as needed. Cuffs and waistlines need to be tightened to avoid being dragged and rolled by the CNC bus processing machine  3. Inspection work must be carried out before the operation. Check whether the stop bolts of the punching upper and lower templates are tightened; whether the bolts of the shearing upper and lower templates are loose; the bending molds are installed firmly.   4, fully consider the CNC bus processing machine The operating range is set on the basis of the movement of the busbar and the busbar, and irrelevant personnel should not enter the range during operation. In order to avoid problems, it is recommended to use protective devices such as safety fences and support brackets.   5. After the equipment is started, the machine runs in winter 15 Minutes, run the machine empty for 5 minutes in summer, and then work.    The above is an introduction to the precautions for the use of the CNC bus processing machine. I hope it will be helpful for you to use the CNC bus processing machine.

p>
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...