Several aspects need to be paid attention to when operating the bus machine
The busbar refers to a shared path on which multiple devices are connected in the form of parallel branches. The main function of the busbar machine is to process copper and aluminum busbars of different specifications. It has five processing units of shearing, punching, large bending, and small bending, and is suitable for the production of large-scale electric control boxes and construction sites of power transmission and distribution construction projects. So what aspects should be paid attention to when operating the bus machine? 1. When the shearing unit of the busbar machine is working, the'cutting work' button switch on the main operation panel is activated. At this time, the'cutting work' instruction light on the main panel is on. Step on the foot switch of the shearing unit or respond. The slider will go down until it hits the bottom dead center switch, and then goes to the bottom dead center. If the foot switch or corresponding button is grasped firmly during the downward movement of the slider, the slider will stop. At this time, if you step on the foot switch or the corresponding button, the slider continues to go down; if you press the 'up' button on the panel of the shear unit, the slider rises to the top dead center and stops. 2. The bus machine is turned on and the air in the electrical box is closed. The switch turns the'control power supply' key switch to the'I' position, and the control power supply is turned on. At this time, the'power supply' indicator on the main panel is on. 3. When the busbar bending unit is working, turn the'bending work' knob switch on the main operation panel to the working position, and then the'bending work' on the main panel When the indicator light is on, step on the pedal switch of the bending unit or the corresponding knob, and the slider will move forward until it hits the front dead center switch and returns to the original state. If the foot switch or the corresponding knob is grasped while the slider is moving forward, the slider will stop. At this time, if you step on the electric door of the busbar or the corresponding knob, the slider continues to move forward; if you press the'backward' knob on the panel of the bending unit, the slider returns to the original state and stops. The above are several aspects that need to be paid attention to when operating the bus machine. Hope it helps you. If you have any other questions about the bus machine, please inquire.