Safe operation steps of busbar machine
Our company is mainly a bus machine-based enterprise. In order for everyone to use the bus machine safely, the following will explain the corresponding operation steps for you. I hope it will be helpful to you: 1. We should do it again before using the bus machine. The fuel tank must be filled with oil before starting to avoid damage to the oil pump. Secondly, you must read the corresponding manual carefully. In addition, the operator needs to operate without a scarf or coat. Finally, when the temperature of the environment is lower than 0℃, it should be turned on for a few minutes before working. 2. When the bus machine is in operation, it should be noted that when the machine is in normal use, do not put your hands or part of the body between the upper and lower molds (blade) to avoid accidents. In addition, it is forbidden to put debris or other tools on the workbench to avoid accidents caused by rolling into the mold or knife edge. During operation, you should be careful when holding the workpiece and waiting for the slide to go down. Finally, the sharpness of the blades and die edges must be checked regularly, and they should be replaced in time when they are worn. 3. After operating the bus machine, it should be shut down safely in the correct order to avoid unnecessary trouble. The above is the safe operation steps of the bus machine. Our bus machine products are of high quality and reasonable price. Those in need are welcome to come and order!