Process characteristics of CNC bus processing machine

by:JPSK     2021-06-05
The CNC bus processing machine is mainly suitable for the high and low voltage switch cabinet and transformer manufacturing industries, and is used to process various specifications of copper and aluminum bus bars. The machine includes platen, support plate, grating controller, oil cylinder, indenter, column, shearing die, punching die, bending die, as long as the corresponding processing unit can be used for punching, shearing, and folding. Processing and production efficiency are high. Today we will understand what are the technological characteristics of the CNC bus processing machine. 1. The CNC bus processing machine is suitable for processing periodic and compound production parts. The market demand for some products is cyclical and seasonal. If a special production line is used, the gain is more than the loss. The processing efficiency with ordinary equipment is too low, the quality is unstable, and the quantity It is difficult to guarantee. After the first trial cut using the machining center, the program and related production information can be retained, and the next time the product is reproduced, the production can be started with a very short preparation time. 2. The CNC bus processing machine is suitable for processing high-efficiency and high-precision workpieces. Some parts have little demand, but they are key components that require high precision and short construction period. The CNC bus processing machine is used for processing. The production is completely controlled by the program, which avoids long process flows, reduces hardware investment and human interference, and has production benefits. The advantages of high and stable quality. 3. It is suitable for workpieces with suitable batches. The flexibility of the CNC bus processing machine processing center is not only reflected in the rapid response to special requirements, but also can quickly achieve mass production, especially small batch production. For some complex parts, 5-10 Pieces can be produced. 4. The application of four-axis linkage and five-axis linkage machining center of CNC bus processing machine and the mature development of CAD/CAM technology have greatly increased the complexity of processing parts. The use of DNC makes the processing content of the same program sufficient to meet various processing requirements, making the automatic processing of complex parts very easy. The above is the introduction about the technological characteristics of the CNC busbar processing machine, I hope it can be helpful to you.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...