Management method of busbar bending machine
Busbar bending machine is suitable for batch processing of busbars in the electrical industry, with functions such as bending, punching, cutting, leveling, embossing, and crimping of cable ends. The whole machine consists of a machine head and a hydraulic pump station. It is easy to disassemble and assemble, light in weight, with casters, easy to flow, quick to change molds, and high in work efficiency. Today, I will introduce the management method of the busbar bending machine. 1. The busbar bending machine is used by Denso Group and is responsible for daily maintenance. 2. To use the busbar bending machine, fill in the usage record. 3. Other personnel need to use the busbar bending machine under the guidance of the operator. 4. The operator uses the busbar bending machine as required to ensure the normal use of the bending machine and mold. The mold is kept by a dedicated person, and it is not allowed to use the mold without permission without the consent of the mold custodian. 5. The mold custodian shall not freely hand over the mold to non-operators. 6. u200bu200bThe operator is mainly responsible for the damage to the machine body and mold caused by improper operation. Depending on the specific circumstances, the operator shall bear at least half of the mold or fuselage repair costs. 7. The company will impose severe penalties on deliberate damage to the mold and the fuselage. The above is an introduction to the management method of the busbar bending machine, I hope it can be helpful to you. If you have any related questions, please inquire.