Die casting is a precision high volume production process

by:JPSK     2020-04-21
The production of die casting rates can vary from just a few components to thousands of components per hour, and the most common metals used for this process include zinc, aluminium, and magnesium alloys. However, other less frequently used metals can include brasses, copper and copper alloys, and this is due to their higher melting temperatures. The castability of a metal is primarily related to its melting temperature, and a few other factors which include : Of all the alloys available, zinc is usually considered to be the most castable, closely followed by aluminium, magnesium, and finally the various copper alloys. The type of alloy used will inhibit maximum part size, and although the final weight of the part is considered, it is material density that is weight per unit of volume that is the final determinant; for example; the density of zinc is .24 lb. per cubic centimeter; magnesium is .066 lb. per cubic centimeter, so for a given weight, a component cast in magnesium will be larger in size than a part cast in zinc. Die casting machines are usually hydraulically driven and often positioned horizontally. There are two main types of die casting machines that are commonly in use, and these are the cold camber type and the hot chamber type. The hot chamber type is used for zinc and other lower melting temperature alloys, but is sometimes also used for magnesium. When they are in operation, a reservoir of molten metal is seated in a furnace and this metal is injected into the die. The injection pressure is variable from 1500 psi to over 4500 psi. ( pounds per square inch ) Cold chamber machines are mainly used for other alloys due to their higher melting temperatures. The molten metal is fed into the die from an external furnace, and both types of machine ( hot chamber and cold chamber ) will use a cylindrical pressure vessel known as an accumulator, which is charged with nitrogen and will boost injection pressure. Die casting machines are rated by clamping force capacity, and the clamping systems may be either pneumatic, hydraulic, mechanical or a combination of systems. Die construction is common for cold and hot chamber casting. The die determines the shape of the finished part, and also act as a heat sink to cool the casting, provide a vent for trapped gases and air and contain the mechanism to eject the finished component. The die may consist of single or multiple cavities, and this is to produce identical multiple parts.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...