Detailed steps for the safe operation of the bus processing machine

by:JPSK     2021-06-02
Bus processing machines are widely used in high and low voltage switch cabinets, substations, bus ducts, bridges, electrical switches, communication equipment, household appliances, shipbuilding, office automation equipment, elevator manufacturing, chassis and cabinet manufacturing and other electrical complete manufacturing industries. What are the safe operation steps of the bus processing machine?  Before operation  1. The fuel tank must be filled with oil before the first start-up to avoid damage to the oil pump.  2. You must read this manual carefully and be familiar with the structure, performance and operation methods of the machine.  3. Don’t wear scarves or coats and other clothes.  4. Use the correct method to work in order to stop and get rid of danger as soon as possible in the event of a failure.   5. If the ambient temperature is lower than 0°C, it should be turned on for a few minutes before working.   During operation    1. Assembling, debugging (molding, adjusting blade gap) or disassembling the mold must be carried out by personnel familiar with the machine in accordance with the prescribed procedures.  2. When the machine is working normally, do not put your hands or part of your body between the upper and lower molds (blade) to avoid accidents.  3. Do not put all sundries and tools on the workbench to avoid accidents caused by rolling into the mold or knife edge.  4. Since this machine can be operated by multiple people, there must be someone responsible for directing production.   5. Be sure to choose the gap between the shear blade and the die and the bending radius according to the thickness of the copper bar (or aluminum bar).  6. u200bu200bBe sure to stop the machine when changing the mold to avoid danger.  7. During operation, be careful when holding the workpiece and waiting for the slide to go down.   8. The sharpness of the blade and die cutting edge should be checked regularly. If the cutting edge is found to be dull, it should be sharpened or replaced in time.  9. Keep the oil clean and the oil circuit unblocked, and lubricate the moving parts of each unit every shift.  10. The electrical and hydraulic components must be flexible in action and in the correct position. If abnormalities are found, they must be stopped for inspection immediately.  After the operation,   After the operation, be sure to shut down safely in the following order:    (1) Turn off the working buttons of each unit.   (2) Turn off the power switch on the operation panel.   (3) Turn off the main circuit air switch.   (4) Turn off the workshop power switch   The above is the content shared with you today, I hope it can help you, if you need it, please feel free to contact us!  
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...