Cnc Copper Busbar Fabrication Machine

Product Introduction

Three In One Busbar Machine,have three functions:bending,cutting and punching.Three operations working at same time.cutting no waste,no burrs and droop.bending unit just input angle and thickness.punching unit can placed six different molds.

Nine Main Functions

punching

shearing

Flat bending

Vertical bending

Embossing

U bending

Piezoelectric cable head

Reverse flattening

Chamfer

The Source of High Quality is Our Serious Attitude.

1.SHEARING UNIT

1. The workpiece is flat with no corner, no waste and no burr.
2. One pair of shearing knife is equal to two pairs. Both sides of the knife have blades, which can be used for changing sides.Large adjustment allowance reduces the cost of tool change in later stage.
3. Positioning ruler: ensure machining accuracy and improve work efficiency of batch production.

2.PUNCHING UNIT

1. Toothed six-mode integrated turntable: no loose, good line of sight. The absolute alignment of the upper and lower molds is ensured, and the same mold is improved.Heart rate and extended service life.
2. Six-mold position (four round holes, two long round holes), no need to change the mold frequently.
3. Three kinds of punching positioning methods: positioning by the ruler, positioning of the positioning needle, positioning of the light projection.
4. Punching block: After adjusting the position of the punching block, batch processing saves time and effort and improves work efficiency.

3.CLOSED BENDING UNIT

1. German Siemens PLC programmer is adopted in the bending unit with memory function;User can input processing data in advance, system root
Call up data according to the input information for processing;Can process the workpiece field data at any time into the system, and call out the reuse.
2. The bending accuracy + / - 1 °, repeat accuracy + / - 0.5 °.
3. When you know the Angle, you only need to input the thickness of the plate and the required Angle on the CNC touch screen to complete the workpiece processing.

When the Angle is unknown, only the input height and side length are needed to directly process the workpiece (z-bend).

Product Accessories

Precision scale

Ready to measurerelcome e!

Punching mold / shear mold material: Cr12MoV / chromium 12 molybdenum vanadium. Compared with Cr12 steel, Cr12MoV has more molybdenum and vanadium elements, which improves the toughness and wear resistance of steel. When making metal cold stamping dies, the molybdenum vanadium steel is used to make high-strength cutting edges and stretching, which is longer than the mold life